- PDF Download
Frozen meat is best thawed in a closed container to avoid meat contamination. The thawing equipment is used to thaw when the demand is great. Therefore, the thawing equipment container must be convenient for picking and dropping frozen meat and thawed meat.
- Frozen fresh meat
- Frozen fresh meat
Advantages of high-efficiency microwave thawing machine:
The detachable cap of the sealed container has three sides and a top surface. When the opening is opened, the movable cover can be separated entirely from the base, the meat rack is completely exposed so that the frozen meat can be placed and the thawed meat can be taken out. And the opening and closing of the movable cover and the base are convenient. The frozen meat thawing method is convenient to operate and has high work efficiency. To make the frozen meat evenly heated and not in direct contact with the steam inlet’s high heat steam, the sealed container is provided with an aluminum or iron baffle, the baffle is suspended from the top surface of the movable cover. The steam inlet and the steam outlet are arranged on the top surface of the movable cover. A partition is arranged between the steam inlet and the steam outlet. The partition is n-shaped, and the partition is connected with the movable cover and the baffle. When the sealed container is closed, the baffle covers the top surface, the left and right sides of the meat rack, the baffle is not in contact with the sealed container. The lower side of the baffle is provided with a temperature sensor. Due to the set baffle, the steam contacts the baffle after entering and condenses into water droplets on the baffle to dissipate heat into the sealed container’s air to warm the air. This prevents a large amount of steam from coming into direct contact with the frozen meat, thereby avoiding the condensation of many water droplets on the surface of the frozen meat and taking away the soluble nutrients in the frozen meat.
The high-efficiency microwave thawing machine mainly adds steps to shake the crystallization of the frozen meat surface. The use of gradual thawing reduces the time to understand the freezing time and saves energy. The insulated liquid collecting box can reduce the heat absorbed by the waste liquid.
High-efficiency microwave thawing machine
- Structure Figure 1
- Structure Figure 2
1, movable cover, 2, base, 3, rolling wheel, 4, steam inlet, 5, steam outlet, 6, meat rack legs, 7, meat rack, 8, vibration generator, 9, deflector, 10, Baffle legs, 11, liquid collection box, 12, casing, 13, baffle, 14, boom, 15, partition.
Working principle of high-efficiency microwave thawing machine:
Frozen meat thawing machine comprising a sealed container and a meat rack located within the sealed container, a steam inlet and a steam outlet connected to the sealed container, the sealed container being a rectangular parallel tube, the sealed container comprising a base and a removable lid, the base is consisting of the bottom and sides of the rectangular parallel tube. The removable lid consists of three sides and a top side of the rectangular parallel tube, and at least two rolling wheels are provided on the outer side of two sides of the removable lid near the base. The lowest point of the rolling wheels being flush with the bottom side of the base. During the rolling process, the movable cover has two states of either hermetically docked or completely separated from the base. To cause the crystal to oscillate on the frozen meat’s surface, a vibrating generator is disposed on the base’s bottom surface, and the meat rack is disposed on the vibrating generator.
A deflector is disposed between the meat rack and the vibration generator to prevent the waste liquid generated by the vibrating crystal from contaminating the sealed container. The meat rack is a box body with a bottom plate as a mesh plate, and the deflector is fixed on the base. On the bottom surface, the deflector is inclined. A liquid collecting box is arranged below the lower end of the deflector; the meat rack is fixed on the vibration generator through a plurality of meat rack legs. A plurality of vertical sleeves is fixed on the deflector’s top surface of the deflector, the deflector is provided with a hole communicating with the sleeve, and each of the meat rack legs of the meat rack is inserted into a sleeve. A sealing ring is arranged in the sleeve.
1. All of our machines are warranted for one year, including high-efficiency microwave thawing machine and fresh meat fast microwave thawing machine.
2. We will arrange professional technical engineers to help you install the machine in your factory. If you need it, we will train your staff on the mechanical operation.
3. We have an excellent mechanical production team, sales team, foreign trade documentation team, and after-sales service team to ensure that we meet customer requirements.
Our Leader Microwave Equipment Company has extensive experience and state-of-the-art technology in the field of microwave machinery. We always adhere to the principle of “Quality First, Customer First” to carry out our business. Therefore, we are favored by many customers. If you are interested in our machinery and equipment, please contact us in time!